What Inspections are Required before SSAW Steel Pipes Delivery?

 The following tests are should do before SSAW steel pipe leaves the factory:

1. Appearance inspection


Appearance inspection is a simple and widely used inspection method. It is an important content of finished product inspection. The main purpose is to find defects on the surface of the welded seam, dimensional deviations and raw material joints.Usually it can be found by eyes and with the help of tools such as template, gauge and magnifying glass. If there are defects on the surface of the weld seam, there may be inside the pipes. The joint should not be more than 1100mm from the pipe end.


2. Physical inspection 

Physical inspection methods are methods that use physical phenomena to measure or inspect. For inspection of internal defects of raw materials or workpieces, SSAW steel pipes are subjected to hydraulic testing after forming, and then take non-destructive testing. Non-destructive testing includes ultrasonic testing, radiographic testing, penetrating testing, and magnetic testing.


Based on the above, according to SSAW steel pipe quality inspection results, the SSAW steel pipe is divided into three types: qualified products, repaired products and processed products. Qualified products is SSAW steel pipes whose appearance and internal quality meet the standards or technical requirements for delivery. Repaired products is the appearance and internal quality do not meet the standards and acceptance criteria, but are allowed to be repaired and can meet the standards and acceptance conditions after repaired. SSAW steel pipes that failed to meet the qualified products after repaired. Scraps refer to SSAW steel pipes that are not qualified in appearance and internal quality and are not allowed to be repaired or fail to meet the standards.


Above are the requires before SSAW steel pipe leave factory. Changsha Xiangjia Metal Materical Co., Ltd. is the leading manufacture in China, has been insisting on product quality as the center and inheriting quality for 18 years. If you need SSAW, we are your good choice.


评论

发表评论

此博客中的热门博文

The Method of Extending the Service Life of Seamless Pipe

图片
Seamless steel pipes   have hollow sections and are widely used as pipes for conveying fluids, such as pipes for conveying oil, natural gas, gas, water and certain solid materials. The seamless pipe has a certain corrosion resistance, but in order to prolong the service life of the seamless pipe in some extreme environments, it is necessary to remove the oxide layer on the surface of the product. The main cleaning method is pickling. After cleaning, electrolytic cleaning is required again. 1. The seamless steel pipe must wear labor protection supplies before pickling. The on-site working environment should also be checked in detail, mainly to check whether the hoisting of the steel pipe is intact, and work can only be carried out after confirming that it is intact. 2. When pickling seamless steel pipes, the pickling method is mainly hydrochloric acid pickling. Usually, the content of hydrochloric acid is preferably 18% to 20%. 3. The staff also need to know the concentration and temper
阅读全文

Methods of Connecting Spiral Pipes

图片
The most commonly used method of connecting   large-diameter spiral steel pipes   is welding. However, manufacturers also use threaded connections, flange connections, socket connections, and groove connections in projects. In the post,   Xiangjiasteel   would like to introduce you some details about three main connections. 1. Welding and Flange Connection Welding and flange connections are traditional methods of connecting spiral pipes. These methods do not fully meet market demands in terms of safety, sealing performance, cost efficiency, and repair efficiency. They are mainly used for water transmission pipelines, oil and gas pipelines, chemical pipelines, and power pipelines. 2. Clamp Fitting Connection Clamp fitting connections are an advanced method of pipe connections. They can be used for both exposed and buried installations, accommodating both rigid and flexible joints.  3. Groove Fitting Connection Groove fitting connections, also known as clamp connections, have become the
阅读全文

Exploring the Importance of Drill Pipe

图片
Oil Country Tubular Goods   (OCTG) are vital components in oil and gas drilling activities. The term OCTG refers to a range of piping products specifically designed for use in the production of oil and gas. These products include drill pipes, casing pipes, tubing pipes, couplings, connections, and accessories. In this article, we will focus on the significance of drill pipes, one of the three main types of OCTG pipes. A drill pipe is a robust, seamless tube that serves a crucial role in drilling operations. It facilitates the rotation of the drill bit and allows the circulation of drilling fluid. This fluid helps in pumping through the drill bit and flowing back up the annulus, the space between the casing and the piping. The Importance of Drill Pipe in OCTG Endeavors: Drill pipes are designed to withstand axial tension, high torque, and internal pressure. Their strength and durability make them indispensable in the oil and gas industry. Here are some key reasons why drill pipes are cr
阅读全文